Table of contents for this article
Brake tuning under consideration.....
Last year'sFront brake customization I've been thinking about since November.。
I'm going to change the master to a radial pump and use stainless mesh brake hoses...... Last year, I consulted with a bike shop and got a quote.
The other thing to decide is whether to replace the calipers: .... Specifically.BremboDo you want me to put it in? That's the part.
As I mentioned before, for 40mm pitchAXIZ in TokyoandAGRAS in WakayamaOsaka, Japan, for the 65mm pitch.By NA Metal Craft.They have released caliper supports for the Ninja 650/400, so as long as there are no problems with the disc rotors , installation should be easy.
A 40mm cast caliper is not as expensive as you might think. Probably not.TOKICO calipers as standard equipmentThe difference in performance between the two is probably a matter of months.
The problem is that the position of the pads will change & there is a high possibility that they will not line up properly with the disc surface. This can be solved by replacing the disc rotor as well, or by cutting the brake pads each time they are replaced.......
Huh, NISSIN?
そう。TOKICO.......Have you ever heard of TOKICO as a brake parts manufacturer? I didn't know until I rode my NInja 400!......
Tokico
Tokico is an automotive parts manufacturer that once existed in Japan. After an acquisition and merger by Hitachi, Ltd. it is now a brand of Hitachi Automotive Systems. Tokico Techno was an affiliate company, manufacturing and selling gas station weighers, eco-station fillers and dispensers, but changed its name to Hitachi Automotive Systems Measurement in 2015.
I looked into it again, and it seems to have been installed on many Kawasaki models before, so I googled to see if there was a slightly higher grade (like opposed 4-pot, ......) So I googled to see if there was a slightly higher grade (like opposed 4-pot, ) that I could use, but I couldn't find anything.
So, the other day...The new Ninja 400 photographed at the Tokyo Motor ShowI had noticed that from the moment I saw the picture of......
The new NInja 400 has Nissin calipers!.......
I thought this would be an easy way to strengthen the calipers, just in case.The new NInja 650 photographed at Kawasaki PlazaI also checked the photos.....
650もNISSIN.......
I went out of my way to find and buy a Ninja 650 (MY2015) because I liked its design, size, and touring characteristics, but this is the one area where I might envy the new model.
People who read this article also read
